New Holland T8010 Manual page 1698

STEP 100
When the TRANS VIEW menu is displayed, push the
DECR key.
STEP 101
The display will read TRANS SETUP. Press the
DECR key.
STEP 102
The display will read TRANS FSUS. Press the
PROG key.
Section 55 - Electrical System, Controller - Chapter 6
RD05F104
RD05F125
RD05G019
55-6-53
STEP 103
Push the DECR key until the display reads FSUS
Manual and then press the PROG key.
STEP 104
The display will read POS nnnn mV. This display is
the front axle position sensor output voltage. Press
the DECR key.
RD05G028
RD05G030