New Holland T8010 Manual page 1730

Hide thumbs Also See for T8010:

Table of Contents

If equipped with rear fenders, remove the lower

fender retaining bolt and spring nut from the right

rear fender.

Remove the cab floor plugs. Remove the nuts and

washers from the front cab mounts. Remove the rear

cab mount nuts and washers.

Section 90 - Cab, Hood, Seat - Chapter 2

Install the right rear cab raising bracket CAS2577-1

(from CAS2577 Cab Raising Bracket Kit) into the

right rear cab support tube.

Install a bolt (1), and a washer from the cab raising

bracket kit through the slot in the raising bracket and

the hole in the cab side panel. Install a washer and a

nut on the bolt threads and loosely tighten.

Chapters

Table of Contents

T8020 T8030 T8040