New Holland T8010 Manual page 1699

Hide thumbs Also See for T8010:

Table of Contents

The display will read RAISE nnnn mV. Press and

hold the Front Suspended Axle switch to raise the

suspended axle. Release the switch to stop. Press

the DECR key again.

NOTE: The manual raise feature can be useful for

troubleshooting the raise function. Power the raise

solenoid ON and OFF and check for 12 volts at raise

The display will read LOWER nnnn mV. Press and

hold the Front Suspended Axle switch to lower the

suspended axle. Release the switch to stop. Press

the DECR key again.

NOTE: The manual lower feature can be useful for

troubleshooting the lower function. Power the lower

solenoid ON and OFF and check for 12 volts at lower

Section 55 - Electrical System, Controller - Chapter 6

The display will read LOCK nnnn mV. Both the

upper and lower lock solenoids are now powered

ON. Press and hold the Front Suspended Axle switch

to power OFF the lock solenoids.

NOTE: The manual lock feature can be useful for

troubleshooting the lock function. Power the lock

solenoids ON and OFF and check for 12 volts at the

upper and lower lock solenoids.

To continue manual adjustments press the INCR

keys to get back to lower and raise screens.

Press the DECR key when the display reads LOCK

The display will read EXIT MANUAL. Press PROG

key to exit menu.

Chapters

Table of Contents

T8020 T8030 T8040