STEP 80
Install the cab connector at the right hand front side
of the cab.
STEP 81
Connect the cab ground strap.
STEP 82
Use the identification tags to install the return and
supply line on the brake valve.
Section 90 - Cab, Hood, Seat - Chapter 2
RD05M060
RD05M059
RD02C162
90-2-21
STEP 83
Use the identification tags to install the wiring
harnesses on the two brake light switches (1).
STEP 84
1
2
Use the identification tags to install the four hydraulic
hoses (1) and the steering sensing line (2) to the
steering hand pump.
NOTE: After each is installed, firmly pull back on the
hose to make sure it is fully seated.
1
RD02E064
1
RD05M053