New Holland T8010 Manual page 1671

View Menu
STEP 21
Select the software view option from the main menu.
The display will read ARM VIEW. Press the PROG
key. The software is displayed in two par ts. The
display will read Ver#1 on the top of and the first part
of the software code on the bottom of the display.
Press the PROG key.
Section 55 - Electrical System, Controller - Chapter 6
MD05F115
MD05116
55-6-26
STEP 22
The second part of the software code will now be
shown. The display will read Ver#2 on the top and
the software code on the bottom of the display. Press
the PROG key to exit the view menu. The display will
now read ARM VIEW.
MD05F117
MD05F115