New Holland T8010 Manual page 1680

STEP 28
The display will again read VIEW PEDAL. To display
the next Transmission View Menu push the DECR
key.
STEP 29
The display will read SW REVISION. This is the
Software Revision View Menu. Push the PROG key.
STEP 30
The display will read VER#1. Version #1 is the major
software version number, the lower number (1.11.) is
the minor software version number. Push the DECR
key.
Section 55 - Electrical System, Controller - Chapter 6
RD05F113
RD05F116
RD05F117
55-6-35
STEP 31
The display will read VER#2. Version #2 is the
engineering software version numbers. Push the
PROG key.
STEP 32
The display will again read SW REVISION. To
display the next Transmission View Menu push the
DECR key.
STEP 33
The display will read PRES TRNSDCR. This menu
leads to the transmission system pressure display.
Push the PROG key.
RD05F118
RD05F116
RD05F119