STEP 1
Park the tractor on a hard, level surface. Put the
transmission shift lever in PARK. Place blocks in front
of and behind the rear wheels. Start the engine and
fully raise the rear hitch. Turn off the engine and
remove the key.
STEP 2
1
Loosen the two left thumbscrews (1), remove the two
right thumbscrews (2) and remove the toolbox and
battery cover.
Section 90 - Cab, Hood, Seat - Chapter 2
CAB RAISE PROCEDURE
RD02C070
2
RD05K002
90-2-4
STEP 3
3
1
Disconnect the negative (-) battery cable (1), first.
Disconnect the positive (+) battery cable (2). Remove
the three screws (3) securing the right front cab
panel (4). Remove the two screws securing the left
front cab panel. Remove both panels from the tractor.
STEP 4
Open the rear window. Remove the two bolts
securing the rear cab panel to the cab. Remove the
panel.
4
3
2
RD02E069
76-33