New Holland T8010 Manual page 1747

STEP 85
2
4
Install the right panel (1). Install the three mounting
screws (2) and tighten. Install the left panel and
tighten the mounting screws. Install the positive (+)
battery cable (3), first. Install the negative (-) battery
cable (4).
Section 90 - Cab, Hood, Seat - Chapter 2
1
2
3
RD02E069
90-2-22
STEP 86
Install the rear wheels, if removed. Apply antiseize to
the wheel hub bolts and tighten in a crossing pattern
to a torque of 530 to 570 Nm (390 to 420 lb. ft.).
Remove the rear axle supports, if the rear wheels
were removed. Fill the cooling system. Refer to the
Operators Manual for cooling system capacity. Check
the hydraulic fluid level. Add fluid as needed.
Remove the front axle wheel blocks.
RD02C070