New Holland T8010 Manual page 1702

There are 5 main menu options in the EHR MENU:
1. AUX VIEW - This menu displays the software
revision code and scraper configuration.
2. AUX ADJUST - The adjustment menu offers the
operator a means of tailoring the flow from a
remote section to meet the needs of the job to be
d o n e . T h e ex t e n d a n d r e t r a c t f l o w s a r e
adjustable independently.
3. AUX SETUP - The setup option menu is for the
configuration of the implement controls. There is
the option of none, one and two. Default is none.
4. AUX CAL - The calibration menu allows the
control to find the flow thresholds of the valves.
Only the valves that are configured in the armrest
controller at power up are calibrated.
5. AUX EXIT - Used to exit the AUX.
Use the INCR or DECR key to move through these
menus. To enter the menu of your choice, press the
PROG key.
Section 55 - Electrical System, Controller - Chapter 6
MD05F003
55-6-57
Aux View Menu
STEP 1
With AUX VIEW on the display, press the PROG key.
STEP 2
The F/B Pressure (Feedback) screen is on the
display, press the DECR key
STEP 3
The VALVE CAL screen is on the display. Used to
view calibration values. Press the DECR key.
RD06A099
RD06A100
RD06A101