New Holland T8010 Manual page 1675

STEP 5
IMPORTANT: The TRANS ADJUST menu will only
appear when the Electronic Service Tool (EST) is in
use. Do Not enter this menu. Press the DECR key.
The display will read TRANS ADJUST. Press the
DECR key.
STEP 6
IMPORTANT: The TRANS DIAG menu will only
appear when the Electronic Service Tool (EST) is in
use. Do Not enter this menu. Press the DECR key.
The display will read TRANS DIAG. Press DECR
key.
Section 55 - Electrical System, Controller - Chapter 6
RD05G004
RD05G006
55-6-30
STEP 7
The next display will be TRANS FSUS, but only if
equipped with the Suspended Axle Option. Press
DECR key.
STEP 8
The display will read TRANS EXIT. Press the PROG
key to exit.
RD06A079
RD05F134