STEP 14
The display will read EVEN mA. This displays the
calibrated clutch current values in milliamps.
Continue pushing the DECR key to display the
calibrated clutch current values for C/O, C1, C3, C5,
LOW, MID, HIGH, REV and MSTR clutch.
NOTE: Pushing the PROG key at any point will
return you to the upper level menu, VIEW CLTCH.
STEP 15
The Master Clutch milliamp reading is the final
readout. Push the PROG key.
NOTE: If you continue to push the DECR key the
display will start through the menu again starting with
the Odd clutch mA reading.
Section 55 - Electrical System, Controller - Chapter 6
RD05F179
RD05F107
55-6-32
STEP 16
The display will return to VIEW CLTCH. To display
the next Transmission View Menu push the DECR
key.
STEP 17
T h e d i s p l ay w i l l r e a d C A L C LT C H T M P. T h e
Calibration Clutch Temperature View Menu shows
the clutch temp at whic h the calibration was
performed. Push the PROG key.
RD05F105
RD05F108