New Holland T8010 Manual page 1736

STEP 30
Identify, tag, and remove the wiring harnesses on the
two brake light switches (1) on the brake valve.
STEP 31
3
1
Identify, tag, and remove the four hydraulic hoses (1)
and the steering sensing line (2) from the steering
hand pump. Cap the lines and open fittings. If your
tractor is equipped with quick disconnect fittings, use
Special Tool 380000795 (3) to disconnect the lines.
Section 90 - Cab, Hood, Seat - Chapter 2
1
RD02E064
1
2
RD05M053
STEP 32
Identify, tag, and remove the brake valve supply (1)
and return line to sump (2). Cap the lines and open
fittings.
STEP 33
1
Remove the cab connector (1) at the right hand front
side of the cab.
STEP 34
Disconnect the cab ground strap.
90-2-11
2
1
RD02C162
RD05M060
RD05M059