Table 33 Parameters Of The "Io-Link Xx I / Xx O + Pqi" Submodule - WAGO 765-4102/0100-0000 User Manual

Planning
Parameter Group
IO-Link port parame-
ters
IO-Link port parame-
ters (continued)
44 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 33: Parameters of the "IO-Link XX I / XX O + PQI" Submodule
Parameters Default
Enable port diagnos- 1
tics
Enable process 1
alarm (device notifi-
cation)
Configuration source 1
Enable input fraction 1
Enable pull/plug 1
Port mode 2
765-4102/0100-0000
Value Range Description
0: disable The PROFINET port
diagnostics are dis-
abled, i.e. no diag-
nostic alarms are
triggered
1: enable PROFINET port di-
agnostics are en-
abled.
0: disable PROFINET process
alarms are disabled
1: enable PROFINET process
alarms are enabled
0: PDCT (Port and Configuration is per-
Device Configuration formed via a "port
Tool) and product configu-
ration tool"
1: PNIO Configuration is per-
formed via the
PROFINET IO-Con-
troller
0: disable Input fraction is
switched off
1: enable Input fraction is
switched on
0: disable PROFINET pull/plug
alarms are disabled
1: enable PROFINET pull/plug
alarms are enabled
0: deactivated Port operating mode:
Pin 4 is disabled
1: IOL_Manual Pin 4 is operated as
an IO-Link port with
manual configuration
(GSD-based port
configuration)
2: IOL_Autostart Pin 4 is operated as
an IO-Link port with
automatic configura-
tion (plug and play).
3: DI_C/Q Pin 4 is a digital input
4: DO_C/Q Pin 4 is a digital out-
put