Table 35 "Di" (Digital Input) Parameters - WAGO 765-4102/0100-0000 User Manual

765-4102/0100-0000
Parameter Group
Digital configuration
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Parameters Default
DI logic I/Q pin 0
DI logic C/Q pin 0
DI filter time I/Q pin 0
DI filter time C/Q pin 0
Table 35: "DI" (Digital Input) Parameters
Value Range Description
0: DI not inverted Operating mode as
(NO normally open) digital input: The sig-
nal on pin 2 is not in-
verted
1: DI inverted (NC Operating mode of
normally closed) the digital input: The
signal on pin 2 is in-
verted
0: DI not inverted Operating mode of
(NO normally open) the digital input: The
signal on pin 4 is not
inverted
1: DI inverted (NC Operating mode of
normally closed) the digital input: The
signal on pin 4 is in-
verted
0: no filter No filter active for de-
tecting a signal
change of the pin 2
input signal.
30: 3 ms filter time Filter time setting for
detecting a signal
150: 15 ms filter time
change of the input
200: 20 ms filter time
signal; the filter time
is the amount of time
the signal must be
present in order for a
signal change to be
detected.
0: no filter No filter active for de-
tecting a signal
change of the pin 4
input signal.
30: 3 ms filter time Filter time setting for
detecting a signal
150: 15 ms filter time
change of the input
200: 20 ms filter time
signal; the filter time
is the amount of time
the signal must be
present in order for a
signal change to be
detected.
Planning
47