WAGO 765-4102/0100-0000 User Manual page 117

765-4102/0100-0000
Indicates whether the values are discrete values; the default setting for all booleans or
integers with enumeration is "Digital"
• Value Min, Value Max
Value range of the process data element; the default setting is taken from the IODD.
The possible values are limited to these. Since the IODD usually does not indicate a
value range for the process data, the user must configure this. The curves are re-
stricted to the value range according to the setting.
• Display Min, Display Max
Determines where the curve is displayed and in what size; the value range is 0 ... 100,
measured from below
• Color
Eight easily distinguishable colors are available. Multiple assignment is also possible if
needed.
• Time Resolution
Indicates the time unit of the grid
• Grid Width
Sets the grid width
10.2.3.3.9.7 "Generic" Tab
This tab is for operating the IO-Link device even without an IODD. In this process, the
data is displayed as raw data, and the addressing is performed via index and subindex.
To make the default variables easily accessible, they are stored as a pulldown table by
index.
If no IODD is available, only this tab appears. Otherwise, it is available as a supplement.
It is useful in particular for PLC programming, since this usually involves addressing via
index and subindex and the necessity of working with raw data.
The output window shows both the events of the IO-Link port and the results of the read
and write requests that were executed manually.
Event display:
Event (<Type> <Mode>): <Code> : <Name> : <Description>
Type: E Error
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Commissioning
Figure 40: Message Box, Detailed View
117