WAGO 765-4102/0100-0000 User Manual page 48

Planning
Parameter Group
Digital port parame-
ters
"DO" (Digital Output) Parameters
The following table describes the parameters of the DO submodule:
48 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Parameters Default
Enable port diagnos- 1
tics
Configuration source 1
I/Q behavior 0
765-4102/0100-0000
Table 35: "DI" (Digital Input) Parameters
Value Range Description
0: disable The PROFINET port
diagnostics are dis-
abled, i.e. no diag-
nostic alarms are
triggered
1: enable PROFINET port di-
agnostics are en-
abled.
0: PDCT (Port and Configuration is per-
Device Configuration formed via a "port
Tool) and device configu-
ration tool"
1: PNIO Configuration is per-
formed via the
PROFINET IO-Con-
troller
Not supported Pin 2 is not used
Digital input (only Pin 2 is used as a
class A) digital input
Digital output (only Pin 2 is used as a
class A) digital output
Power AUX (only Supply cable 2L+ on
class B) pin 2