Removal Of 0765-Xxxx; After Removal - WAGO 765-4102/0100-0000 User Manual

Installation and Removal
3. Ensure that the equipment part on which you mounted the product is de-energized.
4. Unscrew the two M4 cylinder head screws and remove the product.

8.2.3 Removal of 0765-xxxx

To remove the product, e.g., when replacing a device, proceed as follows:
1. Ensure that the equipment part on which you mounted the module is de-energized.
2. Unscrew the two M4 cylinder head screws with the Allen key.
3. Remove the product.

8.2.4 After Removal

If the product that has been removed is defective, mark it as defective to prevent reuse of
the product.
56 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
765-4102/0100-0000