Forcing Digital Inputs And Outputs - WAGO 765-4102/0100-0000 User Manual

8-port-io-link master class b; profinet; 24 v dc; 2.0 a; 8 × m12 connection
Table of Contents

Advertisement

765-4102/0100-0000
An additional user can be created in the second row. Proceed as follows:
1. In the Username field, enter the username to user for the user. Users that are al-
ready in use are not allowed here.
2. In the Password field, enter the password for this username.
3. Using the combo box on the right, select the role for the new user being created (the
available roles are Maintenance, Operator and Administrator).
4. Click the green field to finish
ð The new user is created and assigned the selected role.
Removing Users
To remove an existing user from the product's user administration, proceed as follows:
Click the red square with the white "x" to the right of the user you want to remove.
ð The user is deleted.
The user root cannot be deleted, so the red deletion button is grayed out there.

10.2.2.4.9 Forcing Digital Inputs and Outputs

To access the forcing functionality for the digital inputs and outputs via the Webserver,
you must be logged in there with operator or administrator rights. To perform forcing, pro-
ceed as follows:
1. From the Webserver main menu (left), select the DIO Forcing menu item
2. Check the Forcing enable box
ð Unless another user is already accessing it, access to the forcing functionality is now
enabled. A table with checkboxes in some of its cells appears on the screen:
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Commissioning
Figure 28: User Administration Menu Item
91

Advertisement

Table of Contents
loading

Table of Contents