WAGO 765-4102/0100-0000 User Manual page 93

765-4102/0100-0000
ð Unless another user is already accessing it, access to the forcing functionality is now
enabled. The screen shows a table with checkboxes in the force columns and should
look something like this:
You can find a description of and more information on the forcing function and explana-
tions of terms in section
You can use the force checkbox to specify for each port of the port group X01...X04 or
X05...X08 in its own row whether port forcing applies to this port. You can do this sepa-
rately for the input and output process data. You can switch between the two port groups
X01...X04 and X05...X08 with the X01-X04 and X05-X08 radio buttons at the top.
To enable forcing for a port and enter forcing data (i.e., substitute values) for it, proceed
as follows:
1. Check the force box for the port in question
2. For this port, you can enter 16 byte substitute values in hexadecimal format in the
set value (hexadecimal) input fields of the column
Concurrent Access
As long as one user is accessing the forcing functionality through a forcing medium, e.g.,
WAGO Webserver I/O Field, it is locked for all other users of the module. They cannot ac-
cess the forcing functionality until the user that is active now terminates his or her access.
In this case, the Web browser displays a message box with the text "Somebody else
is already forcing. Try again later." When the forcing functionality is being
accessed, a small orange icon also appears in the forcing option entry in the menu bar on
the left.
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Figure 30: IOL Forcing Menu Item, "IOL Forcing" Screen
8 Forcing
[} 25].
Commissioning
93