Configuring Parameters - WAGO 765-4102/0100-0000 User Manual

Commissioning
Node Name
SerialNumber
SoftwareRevision

10.2.5.1.2 Configuring Parameters

The OPC UA server provides nodes with configuration parameters for the device. For ex-
ample, the OPC UA client can read out the upper limiting value for temperature in the
OverTemperature node. The path to this node is:
Root > Object > DeviceSet > [device name] > IOLinkMaster > Diag-
nostics > Configuration
The following table lists device-specific configuration parameters.
Node Name
CurrentHysteresis
OverTemperature
OverVoltageL
OverVoltageL2
TemperatureHysteresis
UnderTemperature
UnderVoltageL
124 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Node Class Access
Variable Read
Variable Read
Node Class Access
Variable Read
Variable Read
Variable Read
Variable Read
Variable Read
Variable Read
Variable Read
765-4102/0100-0000
Table 66: Identify Devices
Description
Serial number of the de-
vice
Revision/version of the de-
vice firmware
Table 67: Device-Specific Configuration Parameters
Description
Current hysteresis; unit:
mA
If the current exceeds the
limiting value, the current
must fall back below the
limiting value by the hys-
teresis to revoke the diag-
nosis.
Upper limiting value for the
temperature of a port; unit:
0.1 °C
Upper limiting value for the
voltage in supply cable 1;
pins with the following
functions can be moni-
tored: L+, DI, DO, DIO, IO-
Link; unit: mV
Upper limiting value for the
voltage in supply cable 2;
unit: mV
Temperature hysteresis;
unit: 0.1 °C
If the temperature exceeds
the limiting value, the tem-
perature must fall back be-
low the limiting value by
the hysteresis to revoke
the diagnosis.
Lower limiting value for the
temperature of a port; unit:
0.1 °C
Lower limiting value for the
voltage in supply cable 1;
pins with the following
functions can be moni-
tored: L+, DI, DO, DIO, IO-
Link; unit: mV