Table of Contents
Advertisement
765-4102/0100-0000
• The sum of all currents (for supply cables 1L and 2L)
10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
10.2.2.3.1 Displaying Port Information
For each of the module's IO-Link ports (port X01, port X02 etc.), individual port informa-
tion can be found on the Information, Status, Configuration, IOL and Process data
tabs.
The Configuration tab also offers the option of making port settings.
You can access the port information as follows:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
ð The Information tab opens.
2. Click the desired tab.
ð You can now access information about the desired port.
For each port, you can select from the following five tabs:
Tab
Information
Status
Configuration
IOL
Process data
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 41: Tabs for Port Information and Settings (IO-Link Ports X01, X02 etc.)
Description
Displays the current measured values for temperature,
voltage and current, as well as the port state, individu-
ally for each of pin 1, pin 2 and pin 4. If an IO-Link de-
vice is connected to the port via pin 4, its product data
is also shown. This tab is pre-configured.
Displays status information for the entire port
For displaying and setting port parameters, such as
the operating time or cycle time of the port
Read/write access to data of one of the IO-Link de-
vices connected to the port
Displays the process data
Commissioning
69
Advertisement
Chapters
Table of Contents
