Configuring Ports - WAGO 765-4102/0100-0000 User Manual

Commissioning
Time – Index:Subindex – Write ok: <Result>
If the operation was not successful, an error message appears in the history with error
codes from the IO-Link master and IO-Link device. The entries in the history then have
the following structure:
Time – Index:Subindex – Write failed: IOLMErrorCode(<error code of
the IO-Link master>): IOLDErrorCode(<error code of the IO-Link de-
vice>)
Deleting the Read and Write Access History
To delete the logged history of read and write access operations:
• Click the [Clear history] button
ð The history of read and write access operations is deleted.

10.2.2.4.2 Configuring Ports

The Configuration tab is for viewing and modifying the following port settings individually
for the selected port of the device:
Name
Port mode
Digital input signal filter (pin 4)
IQ behavior (pin 2)
Validation and backup
PortCycleTime
78 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Figure 20: Port XX Menu Item, Configuration Tab
Table 46: Port Configuration Settings for IO-Link Devices
Type
Drop-down list
Drop-down list
Drop-down list
Drop-down list
Input field
765-4102/0100-0000
Explanation
Port operating mode (configuration
of pin 4)
Filter time for digital input signals on
pin 4
IQ behavior of the port (configura-
tion of pin 2)
Settings for validation and backup
for the module check in the event of
module replacement
Expected cycle time of the port