WAGO 765-4102/0100-0000 User Manual page 114

Commissioning
Stores the settings selected in the "Scope Settings," "Menu Collapse States" and "Vari-
able Values" checkboxes in the "default" settings.
• Store Settings
Stores the settings selected with the "Scope Settings," "Menu Collapse States" and
"Variable Values" checkboxes; an input window appears for selecting the name and
comments on the settings.
• Load Settings
Loads the settings selected with the "Scope Settings," "Menu Collapse States" and
"Variable Values" checkboxes
• New ever with default
When the device type is newly created, the "default" settings are loaded automatically
• Deleting settings:
Pressing the <Delete> key deletes the selected setting. The row with the "default" set-
tings cannot be deleted. However, the content is deleted.
10.2.3.3.9.2 "Common" Tab
The "Common" tab shows general information from the IODD about the IO-Link device.
10.2.3.3.9.3 "Process Data" Tab
This tab's behavior depends on the IO-Link master and operating mode:
• Offline:
– Only the process data structure is shown. No values are shown, and no values
• Online:
– Depending on the product, it may be possible to selectively write/force the data.
114 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
can be set either.
The higher-level controller is then removed from the communication for this
process data area and, depending on the fieldbus, may be notified of this.
765-4102/0100-0000