Diagnostics Via Profinet - WAGO 765-4102/0100-0000 User Manual

765-4102/0100-0000
LED State
Flickering (load-dependent)
Bluetooth Status
The Bluetooth
tion status.
LED
BT
IO-Link Port Status
LEDs 0 (port X01), 2 (port X02), 4 (port X03), ..., 14 (port X08) indicate the status of the
IO-Link master or digital input/output module.
LED
0, 2, 4, ...
IO-Link port
(pin 4)
1, 3, 5, ...

11.2 Diagnostics via PROFINET

General Alarms
Number
(hex)
0x0100
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
®
LED is integrated into the Bluetooth
Color
Duo LED, blue/red
Blue
Off
Color
Duo LED, yellow/red/green (yellow = simultaneously red and green)
Yellow
Off
Green
Green
Red
Red
Duo LED, yellow/red (yellow = simultaneously red and green)
Off
Alarm Description
Undervoltage, 1L Undervoltage in supply cable 1L
The supply cable has fallen below the limit-
ing value for the minimum voltage
Table 81: LED States – ETHERNET Status
Description
The indicator switches on and off at a frequency of 10
Hz, indicating high ETHERNET activity: on for 50 ms
and then off for 50 ms. The indicator switches on and
off at irregularity intervals to indicate low ETHERNET
activity.
®
antenna and indicates the connec-
Table 82: Bluetooth® LED States
State Description
On Bluetooth
tablished
Off Bluetooth
Table 83: IO-Link Port Status (Class B)
State Description
On Status of digital input/out-
put: 1
Off Status of digital input/out-
put: 0
On IO-Link communication ac-
tive
Flashing 1 Hz No IO-Link communication
or incorrect IO-Link device
On Overload, short circuit (pin
4 and pin 3)
Flashing 1 Hz Overload, sensor supply
short circuit (pin 1 and
pin 3)
Off LED without function
Table 84: General Alarms
Corrective Action
Check supply voltage
Diagnostics
®
connection es-
®
inactive
131