WAGO 765-4102/0100-0000 User Manual page 88

Commissioning
Value
0
1
2
Activating the Bluetooth
Note
Never use the product in areas where operation of radio equipment is prohibited.
The product contains a radio transmitter that can impair the function of electronic medical
devices such as hearing aids and pacemakers.
Note
Only use the product with Bluetooth
country or region.
To enable the Bluetooth
the smartphone or tablet. Proceed as follows:
• A QR appears in the "Information" section of the Bluetooth® tab. Scan it with the
smartphone or tablet.
ð The smartphone or tablet then sends an optical sequence (flash code) to the de-
ð The light sensor registers this sequence. If the sequence is recognized as correct, the
Bluetooth
connection with the smartphone or tablet.
Starting a Bluetooth
Proceed as follows to start a Bluetooth
1. Click Update request.
ð A dialog appears for selecting the Bluetooth
2. Select the firmware file.
ð The Bluetooth
Performing a Reset
Proceed as follows revert a Bluetooth
• Click Reset
ð The Bluetooth
Switching the Bluetooth
To switch the Bluetooth
• Slide the Bluetooth® radio switch to the right
ð The Bluetooth
88 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
®
Interface Using the QR Code Displayed
®
interface, you must have the WAGO I/O Field app installed on
vice's integrated light sensor.
®
interface is enabled, and the product attempts to establish a Bluetooth
®
Firmware Update
®
firmware update starts.
®
firmware is reverted and restarts.
®
Interface Wireless Transmitter on/off
®
interface wireless transmitter on:
®
interface wireless transmitter switches on.
Table 55: Status of the last Bluetooth® firmware update
Status
Ready for operation
Firmware file is being checked
Firmware update is being performed
®
if the product has an approval for the specific
®
firmware update:
®
firmware file.
®
firmware update:
765-4102/0100-0000
®