Configure Bluetooth - WAGO 765-4102/0100-0000 User Manual

Commissioning
Changes to settings require operator or admin rights. If you do not have these, the Set-
tings tab is grayed out and cannot be edited.
Various settings can be reset according to the radio button selection:
Option
Reset Device Information
Reset Network Adapter Settings
Reset Application Parameters
Reset All
To rest the module to the factory settings, proceed as follows:
1. In the left-hand column of WAGO Webserver I/O Field, click the Settings menu item
ð The Device configuration tab appears
2. Select the Factory reset tab
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values
4. Click the [Reset] button
ð The selected settings are reset to the factory settings.

10.2.2.4.7 Configure Bluetooth

The Bluetooth® tab allows the following:
• Displaying information on the product's Bluetooth
• Displaying diagnostic information
• Activating the Bluetooth
• Starting a Bluetooth
• Resetting the Bluetooth
86 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 54: Options for Resetting the Product to the Factory Settings
Reset Settings
Module settings (e.g., maintenance information, sys-
tem time settings and IO-Link master settings within
OPC UA)
Network adapter settings (communication settings, IP
address configuration, station name)
Application-specific data (port configuration and pa-
rameters, remanent parameters)
All Settings
®
interface via QR code
®
firmware update
®
firmware
765-4102/0100-0000
Figure 24: Settings Menu Item, Factory Reset Tab
®
interface module