WAGO 765-4102/0100-0000 User Manual page 87

765-4102/0100-0000
• Switching the Bluetooth
• Switching LED forcing on/off
Proceed as follows to access these Bluetooth
• Open the Bluetooth® tab
ð The Bluetooth® tab appears.
Displaying information on the product's Bluetooth
The Information section of the Bluetooth® tab shows the following information on the
product's Bluetooth
• Current version of the Bluetooth
• Current version of the Bluetooth
• Chip identifier of the Bluetooth
• Interface identifier of Bluetooth
• Individual QR code of the product
(can be scanned by a smartphone or table to launch an app on it for communication
with the product)
Displaying diagnostic information
The Diagnosis section of the Bluetooth® tab shows the following diagnostic information
on the Bluetooth
• Connection status
• Connection counter; is set to 0 with each new Bluetooth
• Number of bytes sent over the Bluetooth
• Number of bytes received over the Bluetooth
• Last error code that occurred during operation of the Bluetooth
• Status of the last Bluetooth
• Result of the last Bluetooth
The status of the last Bluetooth
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
®
wireless connection on/off
®
interface module:
®
firmware used
®
hardware used
®
chip used
®
interface module
®
connection:
®
firmware update
®
firmware update
®
firmware update is indicated as follows:
®
functions in WAGO Webserver I/O Field:
Figure 25: Settings Menu Item, Bluetooth® Tab
®
interface module
®
connection
®
connection
®
connection
®
connection
Commissioning
87