WAGO 765-4102/0100-0000 User Manual page 111

765-4102/0100-0000
• Connected Status
A connection exists between WAGO IO-Link Configurator and the WAGO IO-Link mas-
ter
• PLC Connection Status
Indicates whether or not a PLC is connected to the master; if a PLC is connected, it
has access rights for configuration and for writing process output data; otherwise, the
tool has full access.
• Flashing
Requests flashing for finding the master; this is not available for all masters.
• Search Masters
Searches for masters of the type being configured
The IP address can also optionally be entered manually. Right-clicking on the IP ad-
dress field or clicking on the button next to it opens a dialog for entering the IP ad-
dress. Recently used addresses are offered.
• Online/Offline
Establishes or terminates the connection
• Upload of Data Storage Data from Master
Loads the content of the data storage from the master into the project
• Download of Data Storage Data into Master
Loads the data storage data that was saved previously from the project into the master
• Status of Data Storage Data in Project
The tooltip indicates whether data storage data is stored in the project
• Search Devices
Searches for connected devices; if devices are specified as unknown here, the associ-
ated IODD device description is missing. Please load it into the project nonetheless.
Right-clicking on the corresponding device offers the IODD import. Here you can im-
port the IODD from the local environment or IODDfinder.
With modular IO-link masters, the configuration can be read in online.
Right-clicking in the "Module" column or, if no modules have been configured yet, in an
empty space opens the "Configure Station" selection.
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Commissioning
111