Workbench; Device Catalog - WAGO 765-4102/0100-0000 User Manual

765-4102/0100-0000
the commissioning phase, for example, you can switch it off for a specific "password va-
lidity" period. The login then occurs automatically with the last user role, without a pass-
word prompt. This setting is also made under "Extras/Manage Users."
Under "Extras/Manage Users," you can specify whether or not the start screen should be
suppressed upon startup. The start screen can then also be opened via "Help/About" and
contains information about the software version.

10.2.3.3.2 Workbench

After login, the workbench appears; it always serves as a frame for the other elements. It
consists of the menu bar and toolbar, topology, windows with device controls and the de-
vice catalog. Only the functions relevant to the specific operating mode are displayed.

10.2.3.3.3 Device Catalog

In the device catalog, you find the products supported by WAGO IO-Link Configurator.
These are the IO-Link masters and IO-Link devices from all manufacturers that have a
valid IODD. The device catalog contains the products that can be used according to the
operating mode. The user can hide and unhide the device catalog if needed.
The login and user roles are stored in WAGO IO-Link Configurator.
The WAGO IO-Link masters are added when the tool is installed. Additional WAGO IO-
Link masters can be installed subsequently at any time. The IO-Link masters are ar-
ranged according to their communication connection with the higher-level network and
the manufacturer.
The IO-Link masters of the WAGO I/O System Field are integrated into WAGO IO-Link
Configurator through a WAGO-specified device description. The IO-Link masters are ar-
ranged by fieldbus standard and, if applicable, manufacturer. Entries can be deleted by
right-clicking.
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Commissioning
97