Operational Description - WAGO 765-4102/0100-0000 User Manual

Appendix
Changes or modifications made to this equipment not expressly approved by WAGO
Kontakttechnik GmbH & Co. KG may void the FCC authorization to operate this equip-
ment.

14.2 Operational Description

Product description
The product is for the acquisition and output via IO-Link to sensors, actuators and hubs of
field signals that are sent to a higherlevel controller or received.
The product serves as a decentralized input/output unit in PROFINET I/O networks.
Description of operation (FCC)
The product, a fieldbus module in the IP67 housing, serves the acquisition and output of
data via sensors and actuators for the industrial control technology. The integrated Blue-
®
tooth
monitoring using a mobile device and the WAGO App I/O Field.
The following figure shows the block diagram of the module.
ETHERNET
ETHERNET
Port (X01)
Bluetooth
Technology used
Modulation
Data rate
Work frequency
Maximum power including tune up tolerance
Antenna type
Maximum antenna gain
138 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
interface of the product allows the parameterization, operation, diagnosis, and
Bluetooth (BT)
logic + antenna
(X21)
Logic
(X22)
Port (X02)
®
Transmitter
Power
supply
(X31, X32)
I/O
...
®
Bluetooth Low Energy
GFSK
1 Mbit/s
2402 ... 2480 MHz
Output power: +8 dBm
Tolerance: +2 dBm / –3 dBm
PCB monopole
1.25 dBi
765-4102/0100-0000