Table of Contents
Advertisement
Commissioning
Name
Number of changes
(Change Count)
Date/time of the last ser-
vice (Last Service Date)
Date of the next service
(Next Service Date)
To make changes to the maintenance information:
1. From the Webserver main menu (left), select the Settings menu item
ð The Device configuration tab appears
2. Select the Maintenance information tab
3. Modify the relevant fields there
4. Click the [Apply] button
ð Your changes take effect.
10.2.2.4.5 Updating Firmware
With the Firmware upgrade tab, WAGO Webserver I/O Field provides an option for up-
dating the product firmware.
NOTICE
!
Put system in safe operating mode
Never perform a firmware update during ongoing operation of the system in which the
product is installed. Before any firmware update, the system must first be properly shut
down or put in a safe operating state.
84
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Data Format and Length Description
ASCII decimal num, max.
Counter for changes to the
32 characters
hardware or the device pa-
rameters; only needs to be
incremented if the data
has really changed
ASCII time indication,
Date/time of the last ser-
max. 32 characters
vice, e.g., firmware update
ASCII time indication,
Date/time of the next ser-
max. 32 characters
vice, e.g., firmware update
Figure 23: Settings Menu Item, Firmware Upgrade Tab
765-4102/0100-0000
Table 53: Maintenance Information
Corresponding I&M Field
I&M0: REV_COUNTER
Advertisement
Chapters
Table of Contents
