WAGO 765-4102/0100-0000 User Manual page 59

765-4102/0100-0000
In connection with this figure, note that the cables illustrated for current paths 1L and 2L
are realized not as separate cables, but rather as separate wires within one common ca-
ble.
Supply Cable and Power Supply (M12)
Take the current load capacities into account. In this regard, see section
Power Supply
NOTICE
!
Damage to electronics
For passthrough of the supply voltage, the following should be noted:
The maximum total current permitted on 1L is 16 A.
The maximum total current permitted on 2L is 16 A.
The temperature also affects the permissible total current. To take the effects of higher
temperatures into account, note the information on temperature-dependent derating in
section
Example Calculations
You can find example calculations of the maximum permissible current feedthrough in
section
The power loss per wire can be calculated as follows:
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
[} 34].
8 Derating [} 21].
8 Power Supply Examples
Figure 7: Example of Feeding in and Passing on the Supply Voltages
[} 38].
Connection
8 Design
59