WAGO 765-4102/0100-0000 User Manual page 90

Commissioning
ð You can now no longer work in WAGO Webserver I/O Field with the rights you had
been using till this point. The username used to log on is no longer shown in the up-
per left-hand corner. The Sign out menu item changes back to Sign in.
Guest User Access
By default, the Webserver recognizes the user guest without a password; this was set
up for initial access or guest access.
Initial Login as Administrator
Upon delivered or after a reset to the factory settings, WAGO Webserver I/O Field can be
accessed with the username root and password password. This combination has ad-
ministrator rights.
Note
Change the administrator password immediately after commissioning. The factory
default setting is widely known and does not provide adequate protection.
The Administration tab provides role-based user administration. It allows you to create
and delete users and assign them roles, which their rights depend on. Users can be di-
vided into three roles:
• Maintenance
• Operator
• Administrator
Creating a New User
When "User administration" opens, the following screen appears:
The user root with pre-set password password exists by default; see first row.
90 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Figure 27: User Administration Menu Item (Initial State)
765-4102/0100-0000