Connection Technology; Table 8 Connection Technology; Table 9 Io-Link Port (Class B) - WAGO 765-4102/0100-0000 User Manual

Properties
Height
Length
Weight
Housing
Mounting type
Tightening torque

4.4.3 Connection Technology

Power connector
PROFINET connection
IO-Link ports
Tightening torque
IO-Link Port (Class B)
IO-Link Master (Class B)
Specification
Port mode
Transmission mode
Min. cycle time
Digital Input
Characteristic
Parameters
Recording cycle
Indicators
Digital Output
Output voltage
Current
Residual current
Circuit
Voltage drop through high-side path
Self-protection
Maximum capacitive load
Maximum inductive load
Indicators
Diagnostics
Actuator/Sensor Power Supply
Output voltage
Current
18 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
30 mm
210 mm
610 g
Metal
Screw mount, 2 × M4
1.2 Nm
PWR IN: M12 L-coded, 5-pin, plug
PWR OUT: M12 L-coded, 5-pin, socket
2 × M12, D-coded, socket, 4-pin
8 × M12, A-coded, socket, 5-pin
1.0 Nm
V1.1
Pin 4: IO-Link: autoconfig, manual, tool-based; DI, DO
COM 1, COM 2, COM 3
400 µs (IO-Link frame type_2_1 with transmission
mode COM 3)
Type 3 (IEC 61131-2)
Digital software input filter: without, 3 ms ... 20 ms
The input signal change must exceed 2.5 kHz for cor-
rect device-internal detection of changes. However, it
should be noted that the transfer and processing of the
process data (in the device and in the controller) also
take time and reduce the maximum input signal
change.
200 μs
On/off status LED
24 VDC, 1L powered
Normal operation: max. 2.0 A per channel
Overload operation: max. 2.4 A per channel, per
IEC 61131-2
Less than 1 mA
High-side driver; no reverse current protection of the
digital output
Less than 250 mV
Overcurrent, overload and overtemperature
100 μF parallel to 12 Ω; 10 Hz
1.15 H / 2 A; 0.2 Hz; DC13
On/off status LED
Events: overcurrent, overload and overtemperature
24 VDC, 1L powered and 2L powered
Maximum 4.0 A per channel
765-4102/0100-0000