Wago I/O Field App - WAGO 765-4102/0100-0000 User Manual

765-4102/0100-0000
Menu
DIOForcing
IOLForcing
User administration
Sign-in,
Sign-out
You can find more information on the WAGO Webserver I/O Field in Section
Webserver I/O Field

5.5.4 WAGO I/O Field app

The WAGO I/O Field app is an app for maintenance, diagnostics, operation and monitor-
ing of installed WAGO I/O System Field modules.
This app allows you to display product information for both fieldbus and IO-Link hubs,
make settings and adjust parameters. The communication this requires takes place
through the Bluetooth
scanned to select the product.
Users and the associated access rights can be set up and managed. Outputs can be
forced and inputs set in order to support commissioning of systems. The current mea-
sured values of a port can be displayed (temperature, voltage, current and states) and
configured (including operating mode and filters). Products can be reset to the factory
settings and firmware restarted.
Short Overview
• Scanning a Data Matrix code of an I/O Field module for product selection
• Establishing a Bluetooth
nication
• Querying product information including serial number (UII – Unique Item Identifier)
• Managing known devices for direct selection without scanning the DM code
• Querying sensor/actuator data (diagnostics, manufacturer, configuration, status, cycle
time etc.)
• Guided download of IODDs from the Internet for IO-Link devices (IODDfinder)
• Parameterization of ports (input, input filters, output, substitute value strategy)
• Parameterizing WAGO IO-Link Master
• Forcing outputs (DO)
• Simulation of inputs (DI)
• Importing device description file (IODD) of the IO-Link device
• Parameterizing IO-Link devices
• Managing customer-specific product names
• Displaying diagnostic and status information
• Managing product-specific documents (datasheets, manuals etc.)
• User and rights management
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 26: Function Overview for WAGO Webserver I/O Field and WAGO IO-Link Modules
Tab
-
-
-
-
[} 29].
®
interface of the mobile device once a Data Matrix code has been
®
BLE (Bluetooth Low Energy) connection for wireless commu-
Description Section
Forcing digital inputs and 8 Forcing Digital Inputs
outputs and Outputs [} 91]
8 Forcing IO-Link ports
Forcing IO-Link ports
[} 92]
Set up and manage users 8 Logging Users on and
off and Managing Them
Log users on and off
[} 89]
Functions
8 WAGO
31