Table of Contents
Advertisement
765-4102/0100-0000
This example shows a configuration in which only process data for input has been config-
ured.
10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
You can make the following settings on the module with WAGO Webserver I/O Field:
•
8 Accessing a Connected IO-Link Device [} 75]
•
8 Configuring Ports [} 78]
•
8 Configuring IP Parameters [} 82]
•
8 Storing Maintenance Information [} 82]
•
8 Updating Firmware [} 84]
8 Resetting Module to Factory Settings [} 85]
•
8 Configuring Bluetooth [} 86]
•
8 Logging Users on and off and Managing Them [} 89]
•
8 Forcing Digital Inputs and Outputs [} 91]
•
8 Forcing IO-Link ports [} 92]
•
10.2.2.4.1 Accessing a Connected IO-Link Device
The IOL tab allows read and write access to the IO-Link device connected to an IO-Link
port via index and subindex. The ISDU message format (ISDU = Indexed Service Data
Unit) is used for this
Note
You can find the meaning of the index and subindex values in the documentation
of the connected IO-Link device.
You can find a description of the ISDU message format in the IO-Link specification.
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Figure 17: Port XX Menu Item, Process Data Tab
Commissioning
75
Advertisement
Chapters
Table of Contents
