Io-Link Device Control - WAGO 765-4102/0100-0000 User Manual

Commissioning
A module can be selected from the list of available modules and added. Selected mod-
ules can be deleted. Under "Address," the address within the station can be selected.
In principle, the interface is designed for a hierarchical topology with up to four levels.
However, only one level (n|0|0|0) is currently supported.

10.2.3.3.9 IO-Link Device Control

The IO-Link devices are described by XML device descriptions. These IODDs (IO Device
Descriptions) are imported into the WAGO IO-Link Configurator device catalog. The con-
figuration and parameterization can be performed both offline and online. The settings
are saved in a project file, so they are available for documentation or product replace-
ment, for example. The project file is saved in the project directory with the device de-
scriptions used.
If TCI is used, the project directory is saved in such a way that the data is also included
when then engineering project is archived and unarchived.
If the IO-Link device is selected in the topology or opened by double-clicking in the mas-
ter control, the device control, which essential implements an IODD interpreter, appears.
There are tabs for general product properties ("Common"), process data, identification,
monitoring, parameterization and diagnostics. Their content comes from the IODD. If
there are no entries in the IODD for the corresponding tab, it is grayed out.
There is also a "Generic" tab, which allows access to the IO-Link device via index and
subindex and shows the corresponding data in the raw format. This is also available if
there is no IODD at hand for the IO-Link device.
Toolbar, from left to right:
• Connected Status
• Device default settings
112 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
765-4102/0100-0000