Provisions; Document Portfolio; Intended Use; Table 1 Complete Instructions For Use - WAGO 765-4102/0100-0000 User Manual

765-4102/0100-0000

Provisions

1
This documentation applies to the following product:
0765-4102/0100-0000.

1.1 Document Portfolio

Note
Observe the applicable documentation!
This product must only be installed and operated according to the instructions of the com-
plete Instructions for use. Knowledge of the complete Instructions for use is required for
proper use.
1. Carefully read the Product Manual.
2. Before commissioning, follow the instructions in section
Document Type
& Product Manual
& Data Sheet
& Instruction leaflet
All documentation is available at:

1.2 Intended Use

The product is for the acquisition and output via IO-Link to sensors, actuators and hubs of
field signals that are sent to a higherlevel controller or received.
The product serves as a decentralized input/output unit in PROFINET I/O networks.
• This product is intended for installation in automation technology systems.
• This product meets the requirements of protection type IP67 and is designed for use in
dry indoor spaces.
• This product is intended for use in indoor industrial areas without weather exposure (no
direct sunlight; no salt water or salt spray).
• Operation of the products in Industrial area is permitted.
• Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Improper Use
Improper use of the product is not permitted. Improper use occurs especially in the follow-
ing cases:
• Non-observance of the intended use.
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Contents
Contains all the product-specific information for a product.
Contains the technical data for a product.
Is included with each product. Contains initial information on safe handling of
the product.
ü www.wago.com
8 Safety
[} 11].
Table 1: Complete instructions for use
/<item number>.
Provisions
7