Getting Into And Out Of The Power Wheelchair; Fig. 10 Footrest Lock; Fig. 11 Adjusting The Lower Leg Length - Otto Bock C1000 Instructions For Use Manual

fig. 10 footrest lock
Adjusting the Lower Leg Length (see fig. 11)
1. Loosen the screws on the footrest bar.
2. Move the footplate up or down to adapt the height
to the individual lower leg length and seat cushion
thickness.
DAngEr!
Make sure when adjusting the footrest height,
that the footrest bar (item b) is slid into the
swivel segment (item c) at least 60 mm. After
adjustment, tighten the set screw with a torque
of 8 Nm.
C1000
3. Retighten the screws.
fig. 11 Adjusting the lower leg length
7.2 getting Into and Out of the Power
Wheelchair
The modular design of the power wheelchair and the
ease with which you can remove the side panels and
footrests make it easy to get into and out of the wheel-
chair from the side or from the front.
12/2009
Operation
Page 101