Cleaning And Care; Fig. 46 Rear Lamp, Pane Removed - Otto Bock C1000 Instructions For Use Manual

For mounting, slide the lamp in and rotate it into the
❒
lock.
Insert the lamp socket into the housing and lock the
❒
pane of the direction indicator in place.
To change the rear direction indicators and the rear light,
proceed as follows (see fig. 46):
Unscrew the pane.
❒
Press the lamp lightly inwards and turn it counter-
❒
clockwise by approx. 90°, then remove it.
Insert new lamp and turn it clockwise to provide
❒
function.
fig. 46 rear lamp, pane removed
C1000
ATTEnTIOn!
Do not expose the lamps to moisture!
When reinserting the panes, make sure they sit
correctly on the housing and that the screws
are firmly tightened.
10.5 cleaning and care
ATTEnTIOn!
Risk of damage to the electronics!
Risk of malfunctions!
When cleaning the power wheelchair, the
electronic components, the motor and the
batteries must not come into contact with
water.
ATTEnTIOn!
Risk of damage to components of the power
wheelchair!
Do not use any aggressive cleansing agents,
solvents, or hard brushes for cleaning the
power wheelchair. Never use a water jet or
high-pressure cleaning apparatus for cleaning
the power wheelchair.
12/2009
Maintenance, Cleaning and Care
Page 145