Fig. 26 Snail Symbol Indicates Creep Speed - Otto Bock C1000 Instructions For Use Manual

If the power wheelchair is equipped with a special con-
trol system, a "snail symbol" will appear on the LCD- dis-
play to indicate creep speed.
fig. 26 Snail symbol indicates creep speed
DAngEr!
Risk of injury if the power wheelchair tips over!
The power wheelchair can tip over if the seat is
in the raised position and the user can fall out
of the wheelchair. The following safety instruc-
tions must be followed under all circum-
stances:
Use the lift seat function only on horizontal
❒
ground.
C1000
Only drive short distances with the seat in
❒
the raised position, e. g. when manoeuvring.
The maximum load capacity of the lift seat is
❒
100 kg / 220 lbs (standard version) or 200
kg / 440 lbs (heavy-duty version).
Use the seat lift function only with the
❒
backrest set to the vertical position.
Fasten the lap belt, if possible.Do not
❒
change the mounting position of the lift seat
mechanism or the lift seat.
For lift seat retrofit or conversion, observe
❒
the instructions provided in the service
manual.
DAngEr!
Risk of injury if the power wheelchair tips over!
As soon as the lift seat function is activated,
the wheelchair automatically switches to creep
speed. If this is not case, this represents a
malfunction and the lift seat function must not
be used. Contact a specialist dealer as soon
as possible to eliminate the problem.
12/2009
Options
Page 119