Backrest; Folding The Back Support Up/Down - Otto Bock C1000 DS Instructions For Use Manual

12
13

8.4 Backrest

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► Do not reach into the danger area with your fingers when folding the backrest up or down.
The backrest provides pressure redistribution and support for the upper body.

8.4.1 Folding the back support up/down

The wheelchair may be delivered with the backrest folded down. It has to be folded up and secured prior to use.
Method for standard back adjustment
14
C1000 DS
1
2
Adjusting the lower leg length – mechanical or
power elevating leg support
1) Loosen the Allen head screw on the leg support
bracket (see fig. 12, item 1).
2) Adjust the height of the foot plate to match the
user's lower leg length (see fig. 12, item 2).
3) Retighten the Allen head screw on the leg support
bracket.
INFORMATION: Always adjust both leg sup­
ports.
Adjusting the foot support angle
1) Loosen the Allen head screw on the foot support
(see fig. 13, item 1).
2) Turn the foot support to the desired angle.
3) Tighten the Allen head screw.
Folding up the back support
1) Pull on the strap until the locking bolts are free.
2) Lift the back support and move it to the desired
position.
3) Allow the locking bolts to engage.
4) Check to ensure the lock is securely engaged by
pulling on the back support.
Folding down the back support
1) If needed: Remove the side panels.
2) Pull on the strap until the locking bolts are free.
3) Fold the back support down onto the seat.
Use
23