Backrest; Side Panels - Otto Bock Motus CV Instructions For Use Manual

64

9.5 Backrest

WARNING
Incorrect use of back support angle adjustment
Falling, tipping over due to operation without anti-tipper
► Note that adjusting the back support angle shifts the centre of gravity. Only use the back support angle
adjustment with the anti-tipper activated.
► Drive in street traffic only with a vertical back support.
The product can be equipped with a fixed or optionally an angle-adjustable backrest.
Angle-adjustable back
With this option, the backrest angle is continuously adjustable from 90° to 120° (see fig. 65).
1) Pull the cable of the back release mechanism until the angle adjustment is released by the locking pins (see
fig. 66, item 1).
2) Move the backrest to the desired position.
3) Release the cable. Ensure that the locking pins securely engage on both sides.
65

9.6 Side panels

CAUTION
Pinching at the side panels
Pinching, crushing due to lack of caution in danger areas
► Pay attention not to pinch parts of your body between the side panel or frame parts.
The side panels protect the user and his/her clothing from getting dirty.
If armrests have been installed on the wheelchair, they offer the user additional support for the forearms.
The wheelchair can be equipped with various side panels:
Motus CV, Motus CS
66
Use
37