Otto Bock C1000 Instructions For Use Manual page 140

Failures/Troubleshooting
Indicator Problem source
Incorrect system
configuration
LEDs light up in
quick succession
Defective master
operating device
LEDs light up in
quick succession
Table 5 Overview of problem sources and corrective actions in case of defect / failure
Page 138
Possible cause
On/Off module is missing or
defective;
two identical modules are interfer-
ing with each other;
incorrect input device configured /
connected
Loss of position in the joystick
12/2009
Possible measure
Check the connection of the
input devices and the plug con-
nection of the modules;
restart
Check mechanical initial position
and operation of the joystick;
restart
C1000