Introduction; About These Instructions For Use - Otto Bock C1000 Instructions For Use Manual

Introduction

1 Introduction
1.1 About these Instructions for use
These instructions for use provide the user as well as his
or her attendants with all the required knowledge on the
design, function, operation and maintenance of the
C1000 power wheelchair from Otto Bock Mobility Solu-
tions GmbH. The instructions for use contain all the infor-
mation that is needed to use the power wheelchair safely,
to determine the possible causes of a malfunction and to
help eliminate it.
Knowledge of these instructions for use is absolutely
necessary for ensuring that the power wheelchair is used
safely. Therefore, the user and his or her attendants must
read the instructions for use thoroughly, especially the
section on "Safety", before using the power wheelchair.
This will ensure the complete utilisation of all the features
of the power wheelchair.
The instructions for use have been prepared on the basis
of DIN EN 62079 "Preparation of instructions – Structu-
ring, content and presentation". The instructions for use
are divided into 11 sections. The header of each page
contains the title of the respective section; the footer of
each page contains the description of the power
wheelchair, the edition of the instructions for use and the
page number.
Page 78
The instructions for use also contain cross references
that make it easier for you to handle the manual. An exa-
mple of this is "See section 4.2".
Symbols and signal words:
DAngEr!
Warning – possible danger to life and limb
ATTEnTIOn!
Warning of possible damage to property
nOTE!
Note on important information and tips
nOTE!
Information on environmental protection
12/2009 C1000