Changing Defective Lights; Fig. 44 Changing The Front Lights; Fig. 45 Replacing The Direction Indicator Lamp - Otto Bock C1000 Instructions For Use Manual

Maintenance, Cleaning and Care
10.4 changing Defective Lights
nOTE!
Lamp housings or lamps can be ordered from
a specialist dealer.
To change the halogen lamp in the front light, proceed as
follows:
Lightly push the black engaging lever at the lower
❒
end of the lamp and fold the pane forward (see
fig. 44, item 1).
fig. 44 changing the front lights
1 Engaging lever of front light
2 Recess (use the screwdriver at this point)
Page 144
Replace the defective halogen lamp with a new one
❒
Reinsert the pane.
❒
To change the lamp of the front direction indicator, pro-
ceed as follows:
Open the front direction indicator: Insert a small
❒
screwdriver into the recess of the direction indicator
housing and flip down the pane of the direction
indicator (see fig. 44, item 2).
Remove the pane.
❒
Slightly rotate the lamp to release it from the lock on
❒
the lamp socket and pull it out (see fig. 45).
fig. 45 replacing the direction indicator lamp
12/2009 C1000