Show Dot1X - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show dot1x

To display 802.1X statistics and operational status for the entire switch or for a specified interface, use
the show dot1x command.
Syntax Description
interface interface-id
statistics
all
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
12.1(19)EW
Usage Guidelines
If you do not specify an interface, global parameters and a summary are displayed. If you specify an
interface, details for that interface are displayed.
If you specify the statistics keyword without the interface interface-id option, statistics are displayed
for all interfaces. If you specify the statistics keyword with the interface interface-id option, statistics
are displayed for the specified interface.
Expressions are case sensitive. For example, if you enter exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show dot1x privileged EXEC command:
Switch# show dot1x
Sysauthcontrol = Disabled
Dot1x Protocol Version = 1
Dot1x Oper Controlled Directions = Both
Dot1x Admin Controlled Directions = Both
Switch#
78-16201-01
show dot1x [interface interface-id] | [statistics [interface interface-id]] | [all]
(Optional) Displays the 802.1X status for the specified port.
(Optional) Displays 802.1X statistics for the switch or the specified interface.
(Optional) Displays per-interface 802.1X configuration information for all
interfaces with a non-default 802.1X configuration.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Display enhanced to show the guest-VLAN value.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show dot1x
2-255