Debug Dot1X - Cisco Catalyst 4500 Series Configuration Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug dot1x

To enable the debugging for the 802.1X feature, use the debug dot1x command. To disable the
debugging output, use the no form of this command.
Syntax Description
all
errors
events
packets
registry
state-machine
Command Default Debugging is disabled.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples The following example shows how to enable the 802.1X debugging for all conditions:
Switch# debug dot1x all
Switch#
Related Commands Command
show dot1x
undebug dot1x (same as no
debug dot1x)
debug dot1x {all | errors | events | packets | registry | state-machine}
no debug dot1x {all | errors | events | packets | registry | state-machine}
Enables the debugging of all conditions.
Enables the debugging of print statements guarded by the dot1x error flag.
Enables the debugging of print statements guarded by the dot1x events flag.
All incoming dot1x packets are printed with packet and interface information.
Enables the debugging of print statements guarded by the dot1x registry flag.
Enables the debugging of print statements guarded by the dot1x registry flag.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Displays dot1x information.
Disables debugging output.
debug dot1x
2-157