Rmon Event - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

rmon event

To configure Remote Monitoring (RMON) events to associate with RMON alarms, use the rmon event
command. To remove an RMON event, use the no form of this command.
Syntax Description
event-index
description string
log
trap
owner name
Command Default None
Command Modes Global configuration mode
Command History Release
5.0(3)U1(1)
Usage Guidelines Before you use this command, you must have configured an SNMP user and enabled SNMP notifications
using the snmp-server user and snmp-server enable traps command, respectively.
You can reuse the same event with multiple RMON alarms.
Examples This example shows how to configure an RMON event:
switch# configure terminal
switch(config)# rmon event 1 owner test
switch(config)#
Related Commands Command
copy running-config
startup-config
snmp-server enable
traps
OL-29557-04
rmon event event-index [description string] [log] [trap] [owner name]
no rmon event event-index [description string] [log] [trap] [owner name]
Event or action that the switch takes when an alarm, rising or falling,
triggers. The event index range is from 0 to 65535.
(Optional) Specifies a description for the event. The description can be any
alphanumeric string.
(Optional) Specifies that an RMON log be generated when the event occurs.
(Optional) Specifies that an SNMP trap be generated when the event occurs.
(Optional) Specifies an owner for the alarm. The name can be any
alphanumeric string.
Modification
This command was introduced.
Description
Saves the running configuration to the startup configuration file.
Enables SNMP notifications on the switch.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
rmon event
-SM-173