Show Ancp Port - Cisco 10000 Series Configuration Manual

show ancp port

show ancp port
This command provides statistics of all ANCP local ports and their respective status and neighbor
information.
Syntax Description statistics
client-ID
Access-Loop-Circuit ID
Command Default
Show statistics for all ports.
Command Modes
Global configuration.
Command History Release
12.2(28)ZV2
Examples The following example shows sample output that appears when you enter the show ancp port statistics
command:
ANCP Port Statistics
====================
1
3
4
The following example shows sample output that appears when you enter the show ancp port client-ID
"Access-Loop-Circuit-ID" command:
Neighbor
Name/ID
--------- ----------------------- ------------- --------- ---------
VendorB_10.3.1.2/10.3.1.2
VendorC_10.3.1.2/10.3.1.2
VendorA_10.3.1.2/10.3.1.2
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
2-6
show ancp port [statistics | client-ID "Access-Loop-Circuit-ID"]
Displays a summary of all ANCP port statistics.
When this optional parameter is specified, only information related to the
port appears. The Access-Loop-Circuit-ID is a unique ID that the DSLAM
sends to the BRAS for each unique port.
Modification
This command was introduced and implemented on the Cisco 10000 series
router.
ANCP ports in UP state
ANCP ports in DOWN state
Total ANCP ports
Access Loop Circuit ID
10.3.1.2 eth 1/162 3:11 0/0
10.3.1.2 eth 1/162 3:21 0/0
10.3.1.2 eth 1/162 3:10 45078/89560
Chapter 2
Up/Downstream ANCP Port DSL Line
(kbps) State
DOWN
DOWN
UP
ANCP Enhancement for Ethernet OAM
State
UNKNOWN
SILENT
SHOWTIME
OL-14660-03